Tent Folding Instructions - Adventuridge 93410416 Manual Del Usuario

BREAKING CAMP
Tent Folding Instruction
• Unzip tent doors and windows and collapse the tent, removing and dissembling the poles.
Place the poles in the pole storage bag and tie shut.
• Remove stakes. Do not remove stakes from the ground by pulling on the stake loops. This may
cause the stake loops to tear out of the seam. Place stakes in stake bag and tie shut.
• Spread tent out flat with all loose fabric within the edges of the tent base and distribute evenly.
Try to flatten tent as much as possible.
• Fold tent in half, thirds or quarters. (Folding depends on the length of the tent pole section.)
Fold tent into rectangular shape.
• Fold fly, if tent includes one, and lay on top of the folded tent.
• Place pole bag on back end of tent (trapped air is more easily forced out of the open door when
you are rolling up the tent.) The folded tent should be the width of the pole bag.
Front of tent
(door unzipped)
• Beginning at the back end, roll your tent tightly around the pole bag, forcing out excess air as
you roll. Keep tent edges straight and pole bag centered as you roll.
• When tent is rolled up, tie strap around it and place into carry bag with stake bag, instruction
sheet, and other miscellaneous parts. If tent won't fit into bag, unroll and reroll more tightly.
• Make certain tent is clean and dry before storing. Store in a dry area off of concrete floor.
• Make certain that all campfires are extinguished completely before leaving campsite and that all
trash is put into appropriate trash receptacles or taken with you and disposed of properly.
Dimension A should be
close to but not exceed
A
length of the pole bag.
Folding Instructions
7