Black+Decker BDCOM400 Manual De Instrucciones página 6

ENGLISH
Setting the automatic shut-off pressure
Note: The LCD will only show inflation pressures when the
inflator is being used. In both inflation and pump mode the
unit will show battery status.
To switch between the different units (psi, bar or kPa),
u
press the mode toggle button (3) until the required units
are displayed.
Press the - or + pressure setting buttons (4) until the
u
required pressure is displayed.
After 3 seconds the display will flash and return to a
u
reading of "0.0". This is normal.
Connect the universal valve adaptor and accessories,
u
if required, to the item to be inflated, making sure that
the lever of the valve adaptor is in the down position to
lock it in place.
To start the inflator press the main power switch 1 on
u
the side of the tire symbol 22 .
When the item to be inflated has reached the preset
u
value the unit will automatically turn off.
Note: You may notice the actual pressure reading may drop
after a couple of seconds. This is normal.
To stop the inflator at any time, press the main power
u
button back to the center position.
Note: If the main power switch is turned off, all settings will
be lost and will need to be reentered. This is a safety feature
to prevent the risk of items over inflating.
Using the inflator as a pressure gauge
Connect the universal valve adaptor 9 to the item to
u
be checked.
Press the main power switch 1 on the side of the tire
u
symbol 22 .
The LCD will display the item's pressure.
u
After checking, press the main power button back to the
u
center position and return the air hose to the storage
location.
Maintenance
Your BLACK+DECKER cordless appliance has been designed
to operate over a long period of time with a minimum of main-
tenance. Continuous satisfactory operation depends upon
proper tool care and regular cleaning.
Warning! Before performing any maintenance on cordless
appliances:
Run the battery down completely if it is integral and then
u
switch off.
Unplug the charger before cleaning it. Your charger does
u
not require any maintenance apart from regular cleaning.
Regularly clean the ventilation slots in your appliance/
u
charger using a soft brush or dry cloth.
Regularly clean the motor housing using a damp cloth. Do
u
not use any abrasive or solvent-based cleaner.
6
(Original instructions)
Protecting the environment
Z
Separate collection. Products and batteries
marked with this symbol must not be disposed of
with normal household waste.
Products and batteries contain materials that can be recov-
ered or recycled reducing the demand for raw materials.
Please recycle electrical products and batteries according to
local provisions. Further information is available at
www.2helpU.com
Technical Data
Voltage
Weight
Guarantee
Black & Decker is confident of the quality of its products and
offers consumers a 24 month guarantee from the date
of purchase. This guarantee is in addition to and in no way
prejudices your statutory rights. The guarantee is valid within
the territories of the Member States of the European Union
and the European Free Trade Area.
To claim on the guarantee, the claim must be in accordance
with Black & Decker Terms and Conditions and you will need
to submit proof of purchase to the seller or an authorised re-
pair agent. Terms and conditions of the Black & Decker 2 year
guarantee and the location of your nearest authorised repair
agent can be obtained on the Internet at www.2helpU.com, or
by contacting your local Black & Decker office at the address
indicated in this manual.
Please visit our website www.blackanddecker.co.uk to register
your new Black & Decker product and receive updates on new
products and special offers.
BDCOM400
12V DC
1.83Kg