Aigostar 30KYE Manual De Instrucciones página 9

5.After cooking, the cooker may automatically enter into the
keep warm state. The time of keep warm shall not exceed 2h!
After cooking, the indicator of corresponding function lights
off, the keep warm indicator lights on, the cooker makes
sound and enters into the keep warm state.
Under the standby state, press the "Keep Warm/
button, the keep warm indicator lights on, the cooker makes
sound and enters into the keep warm state.
Tips:
Under any state, press the "Keep Warm/
cancel the current work state and return standby state.
When the cooker is working, it is normal that it makes "cluck"
sound, please set your heart at relax when use.
To cook a small amount of foods, the inner pot may possibly
be lifted when opening the lid, please shake the lid to drop
the inner pot in the cooker body and then remove the lid.
Safely open the lid
1.Cut off power supply or remove the power plug 2.Exhaust
method
A.Quickly open the lid
Turn the exhaust valve to the exhaust place for exhausting,
till the float valve drops down. (For non- fluid foods)
B.Generally open the lid
Keep the electric pressure cooker cool naturally till the float
valve drops down.
3.Open the lid
Turn the upper cover anticlockwise with the left hand, turn it
to the cover open limit place, lift the upper cover with the
right hand to open the lid.
Do not open the lid before the pressure in the pot has been
13
"
" button to
completely released, do not open the lid fiercely if it is
difficult to open.
Do not pull out the exhaust valve when turning the exhaust
valve.
After cooking fluid foods (porridge and soup), do not turn
the exhaust valve, please cut off power supply to make it cool
naturally till the float drops before opening the lid.
After cooking a large amount of foods, please do not
immediately exhaust, it is suggested to keep
warm for a certain moment before opening the lid.
Operation Guidelines
Function Operation Guidelines
After supplying power, the default is standby state, the digital screen
Standby
flashes "----"
Meat
1.Normal cooking: Under standby state, press the "Menu"
button," " indicator lights on, the digital screen flashes
"P01", 10s later if no button is pressed, the product automatically
starts cooking at "Meat", the digital screen displays " P01", and
starts countdown when pressure rises in the cooker.
2.Preset cooking: Under standby state, press the "Menu" button,
press the "Delay Timer" button again, "Delay Timer" indicator
flashes, the digital screen flashes the time, start to adjust the preset
time, press the "+''/"-" button to adjust minute, press it once to
adjust by 10min. 10s after setting, the product automatically starts
preset cooking at "Meat", the digital screen displays the finishing
time and starts countdown.
Exit work state: Press the "
state.
" button to exit the current work
14