Using The Steam Mop On Floors - EASYHOME DM 2012 Manual Del Usuario

USA
Using the steam mop
We recommend sweeping the floor or vacuuming the carpet
before using the steam mop.
Before you start steam cleaning the floor, make note of where you
intend to start and finish the work so that you will not step on and
dirty already cleaned floorspace.

Using the steam mop on floors

WARNING!
Burn hazard!
The cleaning cloth is always very hot after each use and may lead
to burns if not handled carefully.
− Always let the steam mop cool to room temperature be-
fore changing or removing the cleaning cloth.
1. Make sure the cord is fully unwrapped from the steam mop and plugged
into an easy to reach mains outlet.
• The heating unit inside the steam mop starts heating as soon as it is
plugged into the mains.
• The connection to the mains and the heating process are indicated by
the power indicator light
while until the device is operational.
2. Press the steam trigger
3. Begin cleaning by pushing and pulling the steam mop carefully over the
surface to be cleaned.
4. To stop the outflow of steam, press the steam trigger again.
18
www.aldi.us
6 . The heating process takes only a little
once to release steam from the steam mop.
2
AFTER SALES SUPPORT
1-800-886-8506
USA