Cleaning, Maintenance, And Care; Cleaning; Maintenance And Care - Whip Mix VeriWash Manual Del Usuario

VERIWASH User Manual

7. CLEANING, MAINTENANCE, AND CARE

7.1 CLEANING

7.2 MAINTENANCE AND CARE

Always keep the main body clean from alcohol or resin. Keeping the
disposable cover on the main body at all times will protect the main
body from spilled alcohol
Always disconnect the power cable before cleaning/maintenance.
Remove the Wash Container from the base.
Remove the Universal Build Plate Jig, Mesh Basket, and Metal Rods
from the Wash Container.
Remove all alcohol from the Wash Containers.
Clean the inside of the Wash Containers with water, and wipe with
smooth clean cloth.
NOTE: Ensure that all water completely dries before
refilling the container and operating.
Wipe the outer surface of the VERIWASH with Isopropyl alcohol or
water using a smooth clean cloth.
Isopropyl Alcohol
The Isopropyl alcohol should be changed periodically. Use up to
99% isopropyl alcohol.
The Isopropyl alcohol can be used for multiple cleaning cycles, but
the cleaning effectiveness of reused alcohol will decrease with each
cleaning cycle, depending upon the resin used and the printed part
geometry. In case of settling of solid polymerization residues, the
used alcohol must be changed immediately.
As Alcohol decreases over time due to use or evaporation, add
fresh alcohol to keep the right level of alcohol inside the wash
container.
Replace the alcohol when the wash is no longer effective and when
printed parts are tacky even after washing.
It is solely up to the operator to determine when the alcohol needs
to be changed.
Dispose of used Isopropyl alcohol per local and national
regulations.
Accessories can be replaced if needed. For purchasing accessories and
spare parts, visit WhipMix at shop.whipmix.com or www.whipmix.com.
9
Whip Mix Corporation