Bosch DVA-08E Guía De Instalación Rápida página 99

RAID Subsystem DVA-08E, -08K, -16K
15. Click Assign the following drive letter, click F to assign this letter to the selected drive,
NOTICE!
i
You can use another drive letter instead of F. This depends on the VIDOS NVR installation. The
VIDOS NVR allows to use one drive letter only upon installation.
16. Click Format this volume with the following settings, and in the File system box click
17. Click Finish. The drive is formatted as NTFS.
18. Make sure that the drives are available. To check the drives, open the Windows Explorer
19. Install VIDOS NVR service or restart the service if already installed.
20. To verify the proper installation open the browser, type the IP address (http://
21. Make sure that the disks are proper assigned and recording has started. You can see it on
Bosch Security Systems
and then click Next.
NTFS. Click the Perform a quick format check box, and then click Next.
and click the drives you assigned before.
<NVRserver>/status) in the address bar, and then click GO. The browser opens the
following dialog box.
the status screen.
Quick Installation Guide
Connecting a Digital Video Recorder | en
F.01U.027.800 | V4 | 2008.08
99