Tabla de contenido
Idiomas disponibles
Idiomas disponibles
AV input:
AV output:
Operating temperature:
Weight:
Dimensions:
Safety precautions
•
Do not open the camera or monitor in the event of a malfunction. These products should only be
opened by a qualified engineer.
•
Do not expose the monitor to water or humidity.
•
Do not expose the monitor or camera to high temperatures.
•
Do not submerge the camera in liquid.
•
Do not install the system close to strong magnetic fields, such as a TV or speaker. This may affect
the monitor's quality.
Installation instructions
1. Infrared light
2. Camera image sensor
3. Adjusting screw
4. Bracket
5. Screw hole
6. Audio switch
7. Power input
1. Fit the camera with the support on a horizontal or vertical surface.
2. Loosen the adjusting screw (3).
3. Rotate the camera to the desired position.
4. Tighten the adjusting screw.
5. Insert the cable plugs into the jack connectors; black into black, yellow into yellow, white into white.
6. Switch the microphone on or off with the audio switch (6) on the plug.
7. Place the monitor on its support (10) on a stable surface.
The monitor can also be mounted on an adjustable support (order separately with art. nr. SEC
4 x (4x connection cable with power, audio and video included)
1 x (AV cable included)
-10°C to +50°C
450 g
180 x 155 x 25 mm
8.
Microphone
9.
Monitor
10. Support
11. Fitting point for adjustable support
12. DC 12V input jack connector
13. AV output jack connector
4
Tabla de contenido
