Cleaning And Maintenance - Okoia Pur Touch Manual De Instrucciones

The corresponding number 1,2 or 3 will appear on the display.
1: Low 2: Medium
Ion
The ion function is designed to purify the air by releasing negative ions to the air.
To activate this function, press
To deactivate this function, press
Automatic Humidity
1. Repeatedly press
•
The text "AUTO" will flash on the display.
•
The humidity range is between 45% RH to 90% RH with increments of 5% difference.
2. The desired humidity setting will be confirmed after about 5 seconds.
•
The text "AUTO" will stop flashing.
•
The display will alternately show the current humidity and desired humidity setting.
NOTE: If the room humidity is equal to or higher than the set humidity, the humidifier will stop producing
mist.
Timer
You can set the timer to turn off the humidifier after the set time has elapsed.
The timer allows the humidifier to operate from 1 to 12 hours.
To activate this function:
1. Repeatedly press
•
The text "Timer" will flash on the display.
2. The desired timer setting will be confirmed after about 5 seconds.
•
The text "Timer" will stop flashing.
To deactivate this function:
Repeatedly ress until the text "Timer" disappears from the display.
Auto Shut-Off
When the humidifier is empty, it will turn off automatically and the indicator light
Turn off and unplug the humidifier before removing and refilling the water tank.

CLEANING AND MAINTENANCE

Before cleaning, turn off and unplug the humidifier from the mains socket.
To maintenance the performance of the humidifier, it is important to clean it
on a regular basis.
3: High
. The symbol
again and the symbol
to select the desired humidity level.
to select the desired number of hours.
will appear on the display.
will disappear from the display.
EN-5
will flash.