Okoia Pur Touch Manual De Instrucciones página 5

Remote Control
OPERATION
1. Place the humidifier on a firm, flat and level surface, about 10 cm away from the wall.
2. Remove the water tank using the handle.
3. Turn the water tank upside down and unscrew the water tank cap.
4. Fill water tank with cold tap water.
DO NOT fill with warm water as this may cause leaking.
•
WARNING! DO NOT pour water directly into the base as water may
•
enter the air vent which will cause damage to the appliance.
5. Screw the tank cap back on the water tank.
6. Turn the water tank over and place on the base, making sure it fits in place.
7. Plug the humidifier into the mains socket.
8. Turn on the humidifier by pressing
•
The power indicator light will illuminate.
•
The appliance will start producing cold mist at a medium level. The display will show the number "2" and
the current relative humidity (%RH).
•
To turn off the humidifier, press
Misting Control
Repeatedly press to select the desired level of mist output.
Buttons:
Power
Misting control
Ion
Humidity adjustment
Timer
Do not fill water tank with water
from the opening.
.
again. The power indicator light will go out.
The remote control has all the same
functions as the buttons on the control
panel of the humidifier.
To use the remote control, make sure the
humidifier is plugged into the mains
socket, then point the remote to the
display panel and press the desired
button.
Make sure there is no obstacle between
the remote and the display.
EN-4