Idiomas disponibles
Idiomas disponibles
39. Position the front belly pan (2) to the vehicle.
40. Install the four push pin fasteners (3) that secure the front belly pan (2) to the underside of the vehicle's
lower cross-member
41. Install the six screws (1) that secure the front belly pan (2) to the underside of the vehicle's front wheel
house splash shield. Tighten the screws securely.
42. Install the six screws (4) that secure the front belly
pan (2) to the underside of the vehicle's front
fascia. Tighten the screws securely.
NOTE: During installation, ensure rear belly pan is
shingled underneath front belly pan. Failure to
do so may result in damage to belly pan.
43. Position the rear belly pan (2) to the underside of
the vehicle and to the front fascia.
1/23/2012
Page 8 of 27
K6861535
