in shops, offices and other working environments; farm houses; by clients in hotels, motels and other
residential type environments; bed and breakfast type environments.
PART LIST
1. Temperature regulator
2. Operation light (red)
3. Operation light (green)
4. Upper cover
5. Waffle plate
6. Lower cover
7. Cool touch handle
WARNING!! Please do not touch surface while in use. The accessible surface may get hot
when the appliance is operating.
FIRST USE
Before using for the first time, please remove all the various packaging materials and wipe off the unit with
a slightly dampened cloth.
Note: When suing for the first time, you should operate it without food inside.
Position the device such that it can be opened to the full extent.
Apply a light coating of butter, margarine or cooking fat to the heating plates using a brush or a cloth,
before using the device for the first time. This helps to seal the heating plates and must only be carried
out one time.
Subsequently, shut the lid. During operation and warm up, this must always be closed. Plug the device
into a suitable mains socket (the green and red operation lights light up) and switch the device on.
The waffle plate requires approx. 4‐5 minutes to warm up. When the desired temperature has been
attained, the green operation light goes out.
When using for the first time, you may notice slight smoke and odor. This will not recur and is due to
the final production residues, which are harmless.
After this warm up process, allow the device to thoroughly cool down. Subsequently, clean the device
as specified in the chapter on "Cleaning and maintenance".
The device is now ready to use.
OPERATION
Plug the device into a properly installed mains socket and switch the device on, by turning the
adjustment knob to the right temperature level. (the red and green operation lamp will light up).