Idiomas disponibles
Idiomas disponibles
29. Position the fog lamp assembly behind the fascia
opening. Align the four slots in the mounting ring
with the latching tabs. Apply firm and even pressure
until the fog lamp assembly snaps into place.
Repeat for driver side.
30. Plug the end of the fog lamp harness in the fog
lamp connector.
Repeat for driver side.
31. Locate the small stud on the side of the metal flange
directly above the driver side frame rail. Remove
one (1) 10mm nut and use it to attach the ground
wire eyelet to the stud.
7/24/12
A
D
D
11
K6861310
