English - Genius Speed Wheel 5 Pro Manual Del Usuario

Key1
Key3
Key7
Key5
Key9/Select
Led
Turbo
Turbo Key
Key11/Fn
Software Installation: Install the driver first before you install Speed Wheel 5 Pro to the system. The Wheel will not support the
vibration function, if the driver is not installed.
1. Insert the driver CD into your CD-ROM; wait for a few seconds for your PC to load the disc; the auto run program is
executed and the opening installation screen appears. Please follow the on-screen instructions.
2. If your system doesn't launch the installation software automatically, you can locate the file in the directory of your CD drive
and click on it, then follow the on-screen instruction to install the software.
Hardware Installation
1.
Plug the Wheel to an USB port on the PC/PS or a USB Hub. And, connect the Pedal to the main unit with the included
cable. After connection, system will "Find a new hardware" and complete the installation.
2.
Go to Game Controllers page and select "Advanced". It should work as a wheel. Or a game pad with compatible electrical
function design. Check the installation again if it is not correct.
Turbo Speed Setting Key Remapping Setting
Turbo+ Key10/Start Key_10/START + Turbo
Turbo Function:
1.
Set/Clear Turbo Function: Press and hold the TURBO button, then press any action Key 1,2,3,4,5,6,7,8,11, or Brake Pedal
to set the turbo function for it. Turbo LED will flash accordingly. To release the Turbo function, repeat the same procedures.
2.
Set Turbo Speed: Press and hold the Turbo button, then press the Key_10/START button only. The Turbo/Macro speed
will be adjusted cyclically from 2->4->8->16->2 Hz, each time the Key_10/START button is pressed.
Direction Key Function for Game SetUp Page:
1.
Press Key9-Selecl for 2 seconds to set Direction_Key Mode. Turbo LED will be lit to show this mode. The following Key will
act as each direction controlling: UP
2.
Press Key9-Selecl 2 seconds again to release Direction_Key Mode. Turbo LED will be at normal status.
Key Mapping Functions: The main purpose of Key Mapping Function is to duplicate the function of SOURCE Key to TARGET
KEY. For certain racing game, the brake and acceleration function may be not relative to the BRAKE pedal or
ACCELERATION pedal. With the help of Key Mapping, we will be able to duplicate the function to our favor hardware key.
Please note that we can only set the Key_Mapping function at Key 5/6/7/8, Brake Pedal and Acceleration pedal. For each
Key_Mapping operation, you will only can duplicate one key to another.
1.
Set Key Mapping Function: Press and hold Key_10/Start, and press Key_Turbo at the same time. TURBO LED will be fast
blinking. Press your favor TARGET key which you would like to copy that function to it. TURBO LED will be slow blinking
now. Then, press the SOURCE key to duplicate its function to the TARGET key to complete the procedure. TURBO LED
will be off to indicate the function duplication is complete. Proceed the procedures again for another function duplication.
2.
Release Key Mapping Function: Press and hold Key_10/Start, and press Key_Turbo at the same time. TURBO LED will be
fast blinking. Press theTARGET key which you would like to release that function. TURBO LED will be slow blinking now.
Then, Press and hold Key_10/Start, and press Key_Turbo at the same time to release the function. TURBO LED will be off
to indicate the releasing is complete. Proceed the procedures again for each function releasing.
3.
The hardware function of the wheel buttons may vary in different games. Before proceeding to game settings from the
OPTION inside the game, always read your game's manual carefully to set the best game settings.
Speed Wheel 5 Pro/Speed Wheel 5
Key2
Brake
Key4
Key8
Key6
Key10/Start
PS Switch
Pedal Connector
PS3 Mode
Switch to PS Position
Key 5; DOWN Key 6; RIGHT
1
Acceleration
Hook U-Clamp to inner stopper.
Select_Key Start_Key PS_Key
Key_9 Key_10 Key_Fn at PS mode
Wheel Turn to right; LEFT

ENGLISH

Wheel Turn to left