Liberty Garden 840 Manual página 4

6. Turn Spool (B ) around and slide a plastic spacer washer (H), spring (I) and another
plastic spacer washer (H) over the pipe. Take a U-bushing (G ) and two of the 1.75
Bolts ( M) . Attach using the lock nuts. Thread the crank handle onto the end of the
pipe. See Figure 6 & 7.
FIGURE 6
7. Attach the rubber handle (Q) to crank
handle ( J) using the handle bolt.
See Figure 8
. Turn the spool around. Attach the remaining
8
U-bushing (G) on the water supply side using
the 1.75 bolts (M) and lock nuts. Make sure the
bushings are oriented over the holes on the
frame. You may have to compress the
spring to get the spool oriented properly.
See Figure 9
FIGURE 7
FIGURE 8
Figure 9
4
I
H
M