EINHELL 34.070.00 Manual De Instrucciones página 7

Anleitung_Benzinpumpe_SPK7:_
Important!
When using equipment, a few safety precautions
must be observed to avoid injuries and damage.
Please read the complete operating manual with due
care. Keep this manual in a safe place, so that the
information is available at all times. If you give the
equipment to any other person, give them these
operating instructions as well.
We accept no liability for damage or accidents which
arise due to non-observance of these instructions
and the safety information.
1. Safety information
Suitable measures must be taken to keep the
equipment out of the reach of children.
Do not use your mouth to blow out plugged hoses
or other small parts.
Do not allow the liquid to escape the tank or
splash back when filling.
Do not eat, smoke, or drink while working with
fuels.
Thoroughly clean your hands and face after you
have finished your work.
If you have not used the equipment for an
extended period of time, check it for possible
damage prior to reusing it.
Defective parts must be replaced with genuine
spare parts.
Do not leave the equipment (filled or empty) in
direct sunlight.
Petrol is highly inflammable and must therefore
be handled with particular care.
Use the suction pump outdoors only.
Do not smoke and keep an adequate distance
from naked flames when working with the
equipment. Risk of fire and explosion.
Ensure that there are no inflammable or explosive
materials in the vicinity.
2. Layout (Fig. 1)
1. Vacuum pump
2. Sealing plug
3. Collecting container
4. Suction hose
5. Shut-off clip
29.06.2010 7:52 Uhr Seite 7
3. Proper use
The suction pump may be used only for sucking up
petrol, oil and non-hazardous liquids. Never use the
equipment to suck up acids or other hazardous
liquids.
The machine is to be used only for its prescribed
purpose. Any other use is deemed to be a case of
misuse. The user / operator and not the
manufacturer will be liable for any damage or injuries
of any kind caused as a result of this.
Please note that our equipment has not been
designed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.
4. Technical data
Container volume:
Weight:
Suction hose
5. Before starting the equipment
Screw the vacuum pump (Fig. 1/ Item 1) into the
sealing plug (Fig. 1/ Item 2) and place this firmly in the
plastic container (Fig. 1/ Item 3).
Insert the supplied suction hose (Fig. 1/ Item 4) into
the sealing plug (Fig. 2)..
6. Operation
Suction process (Fig. 3)
Place the end of the suction hose into the container
that you wish to empty. By making pumping
movements with the pump lever a vacuum is created
in the collecting container and the liquid is sucked into
this container.
The suction hose can be closed with the supplied
shut-off clip (Fig. 1/ Item 5) to empty the collecting
container.
Important.
If the container you wish to empty is higher than
the suction pump, the liquid will continue to flow
even after you stop the pumping movements. In
this case the liquid can be stopped using the
supplied shut-off clip (Fig. 1/ Item 5).
GB
1.6 l
0.445 kg
1.3 m
7