TEFAL Prep Line HT4121 Manual De Instrucciones página 70

the biggest hole
• C onnect the appliance:
- Y our appliance has five speed levels and
a turbo button. Always begin mixing or
kneading at setting 1 initially, then move to
setting 2, 3, 4 or 5.
- T o knead thick consistent doughs we recommend
using setting 5 only.
- Y ou can also increase the speed by pressing the
turbo button (A3): this function can be used at
all speeds. We recommend that it is only used
briefly (a maximum of 30 seconds for thick
consistent doughs).
• A fter finishing, set the speed control (A2) to "0".
• D isconnect.
• T hen press the ejection button (A1) to remove
the beaters or mixers.
• Using with the base (H): (According to model)
• C heck that the speed control (A2) is set to "0".
• I nsert the rod of each beater (C) or mixer (E) into
the corresponding holes and lock into place. The
beaters and kneaders have a specific shape,
the mixer or beater with the left beater marker
(G) should be positioned to the left, in the
biggest hole
• Place the base (H) on the worktop:
- T o raise the arm, unlock by pressing on the
(Fig.4)
button (J)
- Position the bowl (I)
- P ress on button (J) to unlock the arm and lower
(Fig.5.)
it
- P lace the mixer, fitted with kneaders or beaters,
on the hinged arm until your hear it click into
(Fig.6)
place
• Connect the appliance:
- Y our appliance has five speed levels and a turbo
button. Always begin mixing or kneading at
setting 1 initially, then move to setting 2, 3, 4 or 5.
- T o knead thick consistent doughs we recommend
using setting 5 only.
- Y ou can also increase the speed by pressing the
70
(Fig.1)
.
(Fig.1)
.
.
(Fig.4)
.
.
Note:
INSERT THE MIXER
BY POSITIONING
THE BEATERS OR
KNEADERS IN THE
NOTCHES (Fig.6)