Tabla de contenido
Idiomas disponibles
Idiomas disponibles
II.ASSEMBLY
4.
Please assembly the body frame and base plate together in the following sequence:
Take down the butterfly nuts on the bottom of body frame
Place body frame on a plain table or the packaging box. Pull out the power cord
through the orifice in the central of the base plate and assemble the base plate.
Match the projection in body frame with the invader in base plate.
III. OPERATION
Put the appliance on a flat horizontal floor.
1, Insert the plug into a suitable socket
2, Press the key of ON/400/800/1200W. The middle heating tube will be in use. The key can
control 2 heating tubes. 400W-800W-1200W and circularly select.
3, If you want to change the heating direction, using the correction of the body frame.
Please hold the handle and turn around the body frame slightly.
4, After one hour, the heater timer will stop.
IV. CAUTION BEFORE OPERATION
Tabla de contenido
