Idiomas disponibles
Idiomas disponibles
English
Two people are recommended to
assemble this stand.
1. PLACE the CMS
®
(Cable Management System)
frame (D) on a soft flat surface with the two holes at
the top of the CMS
®
frame positioned UP as shown
in Fig 1.
2. ATTACH the top (least deep) shelf frame (A) to the
(D) using four of the long bolts (1). REPEAT
CMS
®
this step for the middle (medium depth) shelf frame
(B). TIGHTEN ALL BOLTS FULLY.
3. ATTACH the bottom (deepest) shelf frame (C) to the
CMS
®
(D) using two medium length bolts (2) as
shown in Fig. 1. TIGHTEN ALL BOLTS FULLY.
4. ATTACH the left L-bracket (H) and the right
L-bracket (G) to join the sides of the lower CMS
frame (D) and bottom shelf frame (C) using four
small bolts (4). Tighten bolts fully.
5. ATTACH two top shelf support brackets (F) as
shown to the underside of the top shelf frame (A)
and the CMS
®
frame (D) using eight small screws
(7). Tighten bolts fully.
6. APPLY three glass pads (3) to the front of the
bottom shelf frame (C) as shown in Fig. 2.
7. MOVE the stand to the place it will occupy in the
room when fully assembled and in use and TILT the
stand so that it is resting on the rear of the CMS
frame.
8. With the assistance of another person to hold the
glass shelves in place, CAREFULLY POSITION the
bottom (deepest) glass shelf (J) onto the bottom
shelf frame (C) with the two silver discs sitting inside
the holes at the rear of the shelf frame. SECURE
the silver discs with two bolts (5) as shown in Fig. 3.
TIGHTEN BOLTS, BUT BE CAREFUL NOT TO
OVER-TIGHTEN.
9. REPEAT this assembly for the middle (least deep)
glass shelf (I) as shown in Fig. 3. DO NOT
OVERTIGHTEN.
10.With the assistance of another person CAREFULLY
stand the table upright.
11. CAREFULLY PLACE the top (medium depth) glass
shelf (E) onto to the top of the CMS
the two silver discs sitting inside the holes at the
top of the frame. SECURE the silver discs from the
rear with two bolts (6). DO NOT OVERTIGHTEN.
MAKE SURE THE STAND IS LEVEL BEFORE
ADDING THE TV OR COMPONENTS.
12. TURN the six adjustable glass pads on the front
top edges of the middle shelf frame (B) and top
shelf frame (A) to ensure that the glass shelves are
level and well supported.
13. ADJUST the four adjustable feet in the underside
of the bottom shelf frame (C) to ensure the stand is
level and properly supported on a flat, solid
surface.
®
Fig. 2
®
frame (D) with
®
Fig. 1
Fig. 3
