AMG CANADIAN 6 Manual Del Usuario página 57

Program 2 (ON2 and OFF2)
As above but with the keys ON2 and OFF2
Cancel any eventual already set timetables.
Please join the following procedure to cancel any
other already set timetables. This example refers to the
automatic switching off of the program 1 (Off1). The
procedure is the same for all plans.
Press the key corresponding to the switching on or off
time you want to cancel. Referring to the example:
press the key (1). You will see the hours and mi-
nutes and the symbol OFF1 blinking on the display of
the remote control. Now press the key "CANCEL" (2)
to cancel the automatic switching on or off timetables
from the display. Press the key SEND (3) to confi rm
your selection and transmit it to the pcb of the stove.
Daily repeat AUTO
Using the function AUTO, you can repeat the single
automatic switching on and off you selected every
day. You just need to press the key AUTO (1) for
at least two seconds to activate the function. You
will read the words AUTO (2) on the display of the
remote control. Press SEND (3) to confi rm your
selection and transmit it to the pcb of the stove. The
LED chrono-thermostat will light up on the control
board indicating that the programming is on. You
can deactivate the automatic repeat whenever you
want just pressing the key AUTO again for at least
two seconds. The words AUTO will disappear from
the display. Press SEND (3) to confi rm your selection
and transmit it to the pcb of the stove.
Function SLEEP (not available on LCD2)
The mode SLEEP is another function developed
to save money. One hour after its activation, the
system starts decreasing the set temperature
automatically by 1°C. Press the key SLEEP (1)
on the remote control to activate the function
SLEEP. You will see the symbol
of the remote control. Press the key SEND (2) to
transmit your selection to the stove. The control
board will register the new setting showing the
word "SLEE" and the working power of the stove.
You can deactivate the function SLEEP whenever
you want just pressing the key SLEEP again and
the key SEND to confi rm your selection.
Please note: if the stove is working in "Auto", it is
not possible to activate the function sleep.
Always clean the brazier before starting an automatic switching on in order to
avoid any possible missed starts up which would damage your stove and the
environment.
3
1
2
2
3
1
on the display
2
1
3
1
2
2
3
1
17