ATTENTION: This warning sign indicates that the message to which it refers should be
carefully read and understood, because failure to comply with what these notices say
can cause serious damage to the stove and put the user's safety at risk.
INFORMATION: This symbol is used to highlight information which is important for proper
stove operation. Failure to comply with these provision will compromise use of the stove
and its operation will not be satisfactory.
Norms and declarations of conformity
Our company declares that the stove conforms to
the following norms for the EC European Directive
labelling:
• 2014/30 UE (regulation EMCD) and following
amendments;
• 2014/35 UE (Low Voltage Directive) and following
amendments;
• 2011/65 EU (RoHS 2 directive);
• The Rules of Construction Products (CPR-
Construction Products Regulation) No. 305/2011
regarding the construction world;
• For installations in Italy, please refer to UNI
10683/98 or following changes.
While installing the unit respect the local,
national and Europen rules;
• EN 55014-1; EN 55014-2; EN 61000-3-2; EN
61000-3-3; EN 60335-1; EN 60335-2-102; EN
62233, EN 50581.
Safety information
Please carefully read this use and maintenance
manual before installing and operating the stove!
If clarification is needed, please contact the dealer or
the Authorized Assistance Center.
• The pellet stove must only be operated in living
environments. This stove, being controlled by an
electronic board, permits a completely automatic
and controlled combustion; the exchange, in
fact, regulates the lighting phase, 5 power levels
and the shut down stage, guaranteeing the safe
operation of the stove.
• The basket used for combustion allows most of the
ash produced by the combustion of the pellets to
2
fall into the collection compartment. Nevertheless,
check the basket daily, given that not all pellets
have high quality standards (use only quality pellets
recommended by the manufacturer).
• In order to achieve the test report results, please
load the performance parameters retained by
the manufacturer and the qualified tecnichian.
They will use these parameters once verified that,
during the installation, it is possibile to reproduce
the laboratory conditions.
Responsibility
With the delivery of the present manual, we decline
all responsibility, both civil and penal, for accidents
deriving from the partial or total lack of observance
of the instructions contained herein.
We decline every responsibility derived from improper
use of the stove, from incorrect use by the user, from
unauthorized modifications and/or repairs, from the
use of replacement parts that are not original for this
model.
The manufacturer declines every civil or penal, direct
or indirect responsibility due to:
• Lack of maintenance;
• Failure to observe the instructions contained in the
manual;
• Use in non-conformity with the safety directives;
• Installation in non-conformity with the norms in
force in the country;
• Installation by unqualified or untrained personnel;
• Modifications and repairs not authorized by the
manufacturer;
• Use of non-original replacement parts;
• Exceptional events.