Description (Fig. A); Package Contents - Princess 202010 Manual De Instrucciones

Description (fig. A)

Your 202010 Princess juicer has been
designed for rapidly pressing citrus fruits.
The appliance is suitable for domestic use only.
1. Jar
2. Jar lid
3. Jar grip
4. Juice level indicator
5. Pressing cone (small)
6. Pressing cone (large)
7. Pulp collector
8. Drip stop control
9. Dust lid
10. Motor housing

Package contents

• Juicer
• Jar
• Jar lid
• Pressing cone (small)
• Pressing cone (large)
• Pulp collector
• Dust lid
Initial use
Preparation
• Clean the appliance.
Refer to "Cleaning and maintenance".
Assembly
Warning! Before assembly, always remove
the mains plug from the wall socket.
Assembling the juicer (fig. A)
• Mount the motor housing (10) onto the jar
(1). Make sure that the drip stop control (8)
is fully pressed by the jar (1).
• Mount the pulp collector (7) onto the motor
housing (10).
• Mount the small pressing cone (5) onto the
pulp collector (7).
• If required, mount the large pressing cone
(6) onto the small pressing cone (5).
Use
Hints for optimum use
Warning!
• Do not leave the appliance switched on
continuously for more than three minutes.
• Let the appliance cool down for
approximately five minutes after every ten
pressings.
• Assemble the juicer. Refer to "Assembling
the juicer".
• Cut the citrus fruit in half.
• Place the cut surface of one half onto the
pressing cone:
• For small citrus fruits (lemons, limes, etc.),
use the small pressing cone.
• For large citrus fruits (oranges, grapefruits,
etc.), use the large pressing cone.
• Press the citrus fruit with one hand.
The appliance automatically starts to press
the citrus fruit. The juice automatically
flows into the jar.
• Press the citrus fruit until hardly any more
juice is extracted from the citrus fruit.
• The appliance automatically stops when
the pressure is released.
Note: The appliance automatically changes
direction when it is switched off and on in
order to increase the amount of juice being
extracted.
• Regularly check the juice level indicator (4)
on the jar (1) (fig. A).
• Stop pressing the citrus fruit in one of the
following situations:
- no more juice is extracted from the citrus
fruit;
- the jar is filled with the required amount
of juice;
- the jar has reached the maximum
capacity (750 ml).
• Remove the motor housing from the jar.
The drip stop control prevents the juice
from flowing out of the jar.
• Mount the jar lid onto the jar.
• After use, remove the mains plug from the
wall socket.
5