Touchscreen - Intenso TAB 814 Manual De Instrucciones


Select `Turn off USB storage´ to deactivate the memory.
Select the function `Remove safely´
computer.
Note: The pre-installed applications and the Android™ operating system take up some of the existing internal memory. For this reason,
you cannot dispose of the entire internal memory.

8.) Touchscreen

This device is operated via touchscreen. You can easily start applications by tapping the touchscreen
lightly with your fingers, enter texts on the virtual keyboard and switch between the individual main
screens by wiping in the respective direction.
Please remove the protective film from the display before using the device.
The touchscreen detects small electrical charges, as for example emitted by human fingers, and thus
determines the input point.
Use for input ideally your fingertips. Operation with a pen or other sharp objects is not possible.
The touchscreen should not be exposed to water or other electrical devices to avoid malfunctions and
permanent defects.
Notes
a. If the touchscreen is not operated for two minutes, the device goes into standby mode. Briefly press the on / off button to switch to
active mode.
b. To prevent unwanted input, a lock mode is activated automatically. Please unlock the keypad on the touchscreen by simply
dragging the lock icon from the bottom to the top of the screen. The device will now switch to the home screen. Touch the closed
lock on the display and keep it pressed. Draw the lock now to the open lock
your finger from the display. The screen is now unlocked.
You can rotate the device in all directions. It has a sensor that directs the display automatically.
on the computer to separate the device from the
EN - 6
just appearing on the display and release