Setting The Fan Speed; Setting The Humidity Level; Setting The Mode - Aerian ADH20EC Manual Del Usuario

NOTE: In the event of a power failure
Once the power is restored after a power failure, the appliance will continue to operate at the selected
settings before the power failure.
Setting the Fan Speed
Repeatedly press
The corresponding indicator light will illuminate.
NOTE: You cannot set the fan speed when the appliance is in the quiet and dry modes.
Setting the Humidity Level
Repeatedly press to set the required humidity level. The humidity level can be set within a range of
30% to 80%.
For drier air, set the humidity level for a lower percentage value.
For damper air, set the humidity level for a higher percent value.
Each time you press
humidity level, the display will briefly show the set humidity level and then return to actual ambient
humidity level.
NOTE: You cannot set the humidity level when the appliance is in the continuous and dry modes.
Setting the Mode
NOTE: In auto and quiet modes if the ambient humidity level is lower than the set humidity level or lower
than the default comfortable temperature, the appliance will stop dehumidifying.
Auto mode
Repeatedly press
auto mode.
In this mode, the appliance will automatically select the comfortable humidity level.
Continuous mode
Repeatedly press
continuous mode.
With this function the appliance will operate continuously.
EN-6
to select the desired fan speed.
the humidity level will be increased by 10%. After you have set the desired
until the indicator light
until the indicator light
illuminates, indicating that the appliance is in the
illuminates, indicating that the appliance is in the