Phasak Kryptos Serie Manual Del Usuario página 25

2.3. LCD DISPLAY
UPS MODE
UPS Power On
AC MODE
Overload in AC mode
Battery Mode
Overload in Baterry
Mode
NOTE: If backlight shuts off, you may activate it by touching the screen.
KRYPTOS
LCD
*Icon will flash
DESCRIPTION
When UPS is powered
on, it will enter this mode
for 4 seconds.
LCD information will be
displayed in the following
order when LCD is
touched.
1. Output voltage
2. Input voltage
3. Load level
4. Battery capacity
When overload occurs,
alarm will beep every 0.5
second.
Alarm will beep every 10
seconds and LCD
information will be
displayed in the following
order when LCD is
touched.
1. Output voltage
2. Input voltage
3. Load level
4. Battery capacity
When overload occurs,
alarm will beep every 0.5
second.
PH 9478