Quinny XL FASHION Modo De Empleo/Garantia página 20

Removing the wheels
- To remove the rear wheels, pull up the metal spring on the hubcaps (5/7) and pull the wheels off the axle (8).
Attaching the handlebar
- Slide the handlebar with the handlebar brake over the tube ends on the frame, push in both spring catches
and make sure they "click" securely into place in the black plastic part of the handlebar.
- Make sure there is no kink in the brake cables, and that they are positioned parallel to the handlebar.
- Adjust the handlebar to the desired position by pushing both control buttons on the adjusters at the same
time (4/1-4/2).
Folding
- Fold up the sun canopy (see "Attaching/removing sun canopy").
- Place the back of the pushchair seat in the reclining position (see "Adjusting the back").
- Place the footrest in the highest position (see "Footrest").
- Tilt up the fold lock above the right handlebar safety lock (9).
- Pull the left and right handlebar safety lock upwards and push the handlebar forward until the Fashion 4 XL
is folded (10).
- Make sure that the handlebar safety lock "clicks" into the transport safety lock (11).
- Remove the wheels and pushchair seat (see "Attaching pushchair seat") to make the pushchair even smaller.
PARKING BRAKE (see illustration 12)
Always use the brake when parking the Fashion 4 XL, "also when at a standstill".
- The Fashion 4 XL is equipped with an automatic parking brake. To operate the brake, push on the brake bar
(14) on the handlebar. When using the Fashion 4 XL, you will need to push the brake bar continuously.
The parking brake is activated once you release the brake bar.
- NEVER hang anything on the brake bar, as this will prevent the Fashion 4 XL from braking upon the release of
the brake bar.
The handbrake is for slowing down only and should not be used as a parking brake. Always check to make
sure the wheels are locked.
USE
For use with the Dreami carrycot (up to 9 kg)
and the Maxi-Cosi car safety seat (up to 13 kg) (see illustrations 13 – 19)
Attaching the adapters
- First remove the guards by moving the red button under the adapter connections outward while pushing the
guards upward (13).
- Slide the adapter marked A into the right-hand side and the adapter marked B into the left-hand side of the
adapter attachment.
- Continue sliding until you hear a "click" (14).
- Check to make sure the adapters are secure.
Placing the Dreami carrycot
- Unfold the pushchair and place the carrycot onto the adapters with the foot end between the sides of the
handle (15).
- Check to make sure the carrycot is fastened securely.
Removing the Dreami carrycot
- Place your thumbs on the control buttons on both sides of the carrycot (16.1).
- Push in the buttons while lifting the carry cot from the Fashion 4 XL (16.2).
GB
19