Lancom Systems 8011 VPN Guía De Instalación Rápida página 16

LANCOM Routers, WLAN Routers, Access Points and WLAN Controllers
Searching and configuring devices ...
A LANCOM router, wireless router, access point or WLAN controller can be
configured in the following ways (provided that the model is equipped with
the according interface):

LANCOM WLAN
routers only

... with LANconfig
3
If your network is equipped with a LANCOM WLAN Controller, net-
work commissioning of wireless routers and access points is generally
fully automatic. For further information please refer to the user
manual supplied with your LANCOM WLAN controller.
Via the local network (LAN) ³.
Via the wireless network (WLAN) ·, if WLAN encryption (e.g. WEP) has
been correctly set up (or deactivated) in the configuration computer and
the device with the wireless interface.
As of LCOS version 7.22 all LANCOM access points are set to "Managed
Mode" when shipped, and the WLAN modules are switched off. For this
reason the first-time configuration of LANCOM access points via WLAN is
not possible.
Via the serial configuration interface ».
Via a ISDN connection ¿.
³
Always switch on your device first before starting the PC for configu-
ration.
Start LANconfig. Unconfigured LANCOM devices will be found auto-
matically within the local network.
· »
First steps
ISDN
¿