KTM Power Parts 61105099110 Manual Del Usuario página 15

1
3
5
Mounting the silencer
Remove both rubber dampers from the rear chassis pipes.
Mount the fitting kit (1) on the left and right side (apply Loctite 243 to
the screws).
Do not tighten the screws yet.
Insert the catalyst (2) on both sides of the crossover pipe and insert
the rear silencer.
2
Correctly position the silencer (3) and slide it onto the exhaust side of the
Akrapovic connecting pipe (4).
NOTE FOR EVOLUTION EXHAUST:
4
Apply Akrapovic ceramic anti-seizing grease (white tube) to the inside of
titanium collector support.
Attach the springs (5) to the Akrapovic silencer and the connecting pipes.
15