HME IQ ion Guia De Inicio Rapido

Sistema de comunicación para drive-thru
Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

BELT-PAC AND HEADSET OPERATION:
Power on/off
Headset volume up
Headset volume down
or
Talk to customers
Talk to crew
Mode
One-Touch Hands Free
With power off
Mode
Press
Setup
Release buttons
press and release A1 or A2
button to talk to customer
Customer arrives
Alert tone in headset
Single
Touch-Release
Lane
Speak/Listen to customer
Operation
Touch-Release
Communication ends
In Tandem operations, Order Taker #1 uses the A1 button for
customers at order point #1 and Order Taker #2 uses the A2
Customer arrives
Alert tone in headset
1 beep = connected lane
Dual
2 beeps = other lane
Lane
Touch-Release
Operation
Touch-Release
Touch-Release opposite button
to change lanes
Speak/Listen to customer
Touch-Release
Communication ends
COMMUNICATOR STATUS:
CHANGE BATTERY:
If you hear "Battery low" or "Change battery" in your headset;
Slide battery-release latch in direction of arrow
Place battery in battery-charger port for recharging
Install fully charged battery in Belt-Pac or headset
For more detailed operating instructions, go to www.hme.com/userManuals.cfm
For HELP call HME Technical Support at 1-800-848-4468 or Fax (858) 552-0172
+
+
In this mode,
or
or
or
button for customers a order point #2
for Lane 1
for Lane 2
/
or
With power off ―
Drive-Thru Communication System
Push To Talk
With power off
Press
+
+
Release buttons
In this mode,
press and hold A1 or A2 button
to talk to customer
Customer arrives
Alert tone in headset
Press & hold
or
Speak to customer
Release to listen
t
Customer arrives
Alert tone in headset
1 beep = connected lane
2 beeps = other lane
Press & hold
for Lane 1
Press & hold
for Lane 2
Speak to customer
Release
/
to listen
Press
Auto Hands Free
With power off
Press
+ (
(A1 for Single Lane or Lane 1)
(A2 for Lane 2)
Release buttons
In this mode,
talk to customer
without pressing buttons
Customer arrives
Alert tone in headset
Speak/Listen to customer
Touch-Release
Communication ends
In Tandem operations,
only Order Taker #1 can operate
in the Auto Hands Free mode
Customer arrives
Alert tone in headset
1 beep = connected lane
2 beeps = other lane
Speak/Listen to customer
Touch-Release
Communication ends
+
+
or
) +
or
or
or
or
HME# 400G643S
Rev A
12/16/09
loading

Resumen de contenidos para HME IQ ion

  • Página 1 Place battery in battery-charger port for recharging Install fully charged battery in Belt-Pac or headset For more detailed operating instructions, go to www.hme.com/userManuals.cfm HME# 400G643S For HELP call HME Technical Support at 1-800-848-4468 or Fax (858) 552-0172 Rev A 12/16/09...
  • Página 2 Instale la batería completamente cargada en el comunicador (COM6000) o la díadema (o cintillo) inalámbrica Odyssey IQ. Para instrucciones más detalladas sobre el funcionamiento, visite www.hme.com/userManuals.cfm HME# 400G643S Para AYUDA llame a Soporte Técnico de HME al teléfono 1-800-848-4468 o Fax (858) 552-0172 Rev A 12/16/09...