Tabla de contenido
Idiomas disponibles
Idiomas disponibles
NOT.Lithium_16L
29/07/05
AUTOMATIC ELECTRONIC "LITHIUM" BATHROOM SCALES
5. The vertical dash or the figure relating to your own
personal key will reappear.
6. After a few seconds, the difference between your
current weight and your last memorized weight
measurement will appear on the display. If the
figure is preceded by a "-" (minus) sign, you have
lost weight. If a sign does not precede the figure
you have gained weight.
7. The figure will remain displayed for 2 seconds.
Your scales will automatically memorize your new
weight then switch themselves off.
IMPORTANT
1. Do not move the appliance before weighing
yourself or between two weighing sessions.
If you have, reinitialize the appliance.
using for the very first time")
2. If Err0 the wrong weight is displayed, reinitialize
the appliance.
(See "When using for the very first
time")
3. Always weigh yourself using the same scales
and make sure they are placed on a hard surfa-
ce.
Avoid using the scales on a carpet or a mat.
4. Clean your scales with a damp cloth but make
sure no water gets into the appliance.
5. If you plan not to use your scales for a long period
of time, remove the batteries.
Your appliance is now ready to operate.
11:11
Page 7
OTHER DISPLAYS
Display
Err0
Err1
Err2
bAtt
CHANGING THE BATTERIES
• When the batteries are flat, the following messa-
ge bAtt is displayed.
• If nothing is displayed, the batteries may be com-
pletely flat. In this case, try them on another
appliance and replace them if they no longer
(See "When
work.
Do not throw old batteries away.
Place them in a container
specially provided for worn
batteries so that they may be
collected and recycled.
Operating instructions revised: July 2005
This appears in case of:
Incorrect initialisation: begin
again as explained above.
Unstable weight: weigh yourself
again.
Overload: remove weight
immediately
Battery failure: replace it
(or them).
7
Tabla de contenido
