Changeover Of Couplers For Rear Turn Signal Lights; Suspension Settings - Yamaha FJR1300AP Manual De Instrucciones

INSTRUMENT AND CONTROL FUNCTIONS
-4-
CHANGEOVER OF COUPLER FOR REAR
TURN SIGNAL LIGHTS
When a rear pole set (option) is installed to
the motorcycle, this blue coupler
NOTE:
Changeover of the wire harness connection can
determine which lamp to light up.
• Connect to blue coupler
lights on the rear pole set side turn on.
• Connect to white coupler
lights in the rear combination lamps turn on.

SUSPENSION SETTINGS

When the motorcycle gains weight with auxiliary
instruments installed, perform the settings by ref-
erence to the following:
1. Front fork
• Increase pre-load.
• Decrease the rebound damping force (when
pre-load is increased).
• Decrease the compression damping force
(when pre-load is increased).
2. Rear suspension
• Increase pre-load (from soft to stiff)
• No change in the rebound damping force
NOTE:
The above settings are just a rule of thumb. They
vary with the rider's weight etc., so get the feel-
ing in an actual run.
is used.
: Rear turn signal
: Rear turn signal