Connect The Camera To Your Computer - ION Air Pro Plus IO19007 Guia Del Usuario

Tabla de contenido
when the Wi-Fi function is active or connected.
5. Press the WiFi power button to turn off the WiFi anytime.
Note:
1. WiFi will drain your camera battery more rapidly when activated. Turn the WiFi
off if you are not using it to change settings or upload content.
2. Failure to properly seal your camera can result in leaks that damage or destroy
your camera. Your warranty does not cover water damage resulting from user
damage.
3. The rubber seal on the PODZ forms the waterproof barrier to protect the
camera in wet and underwater conditions. You must keep this seal clean as a
single strain of hair or grain of sand can cause a leak into the product.
4. After every use in salt water, you will need to rinse the outside of the product
and the seal with non-salt water and dry. Not doing this can cause corrosion in
the product or failure in the seal, in turn, damaging the product.

3.2 Connect The Camera to Your Computer

1. Turn on your WiFi PODZ.
2. Go to network setting of your PC and choose WiFi setting. Search the network,
find and click "WIFIPODZ"
3. Enter password "123456789" and you can connect to your camera.
4. Open your Internet browser and input "192.168.1.2" or "wifi.podz". You can
view the files stored in your camera
3.3 Connect The Camera to Your Smart Device (Browser)
1. Turn on your WiFi PODZ.
2. Go to network setting of your mobile device and choose WiFi setting. Search
the network, find and click "WIFIPODZ"
3. Enter password "123456789" and you can connect to your camera.
Tabla de contenido
loading

Tabla de contenido