Idiomas disponibles
Idiomas disponibles
English
Assembly
Coral commode/shower chair, mobile
3002020050
1
1. Slide the cover on the straight part
of the chair leg (2x).
4
4. Slide the frame of the backrest in the rear
pockets of the toilet seat.
7
7. Mount the safety key (2x) between the
clickers at the back of the stool. Push down-
wards until it snaps in place.
8
2
2. Position the chair leg with cover (2x)
on the toilet seat. Make sure that all
pins of the toilet seat fully protrude the
chair leg and the cover.
5
5. Slide the base plate over the
front chair legs. Make sure that
the rear pins of the toilet seat fully
protrude the base plate.
Push the base plate onto the toilet
seat until all clickers snap into
place.
8
8. Slide the castor tube into the rear leg (2x).
Adjust to the correct height and click the
E-clip through the chair leg and castor tube.
Make sure the castors are mounted at the
same height.
3
3. Make sure that the chair leg and
cover are well fitted in the toilet seat.
Lay this part on a table for easier
assembly of the back support.
6
6. Mount the safety lock (2x) on
the protruding pin.
Make sure that both safety locks
are screwed on tightly.
M A N U A L
Capítulos
