W+W EN 81-20 Manual De Instrucciones página 14

2.0 Mounting of the stakes
According to the fixation of the guard rail bases on the car roof (with or without mounting rails) the stakes
can be screwed on at two different positions on the bases. Like that, the required total height of 1.10m can
be observed.
2.1 Mounting of the stakes without mounting rails:
Fixation with two self-locking screws flush with the bottom
side of the bases
2.2 Mounting of the stakes with mounting rails:
Fixation with two self-locking screws engaged between
the rails - flush with the car roof.
3.0 Mounting of the handrail (and the cross bar at the rigid variant)
Shorten the handrail and when required the cross bar with a cutting-off
machine or a metal saw to the required measure and put the end caps
back on. The two slide nuts have to be in the handrail.
Screw the handrail and as the case may be the cross bar to the stake.
4.0 Mounting of the cross bar (only the foldable variant)
Shorten the cross bar with a cutting-off machine or a metal saw to the
required measure and put the end caps back on.
The two metal sheets with press nut have to be in the cross bar.
Screw the cross bar to the stake.
Pull up
to unlock
2.1
Checking the folding mechanism:
Pull the cross bar up to unlock the two stakes. The guard rail
can be hinged away. When the guard rail is folded up, the locking mechanism has to
snap automatically into place.
© W W 09/2018 Version 3
+
2.2