Krups XP52 Serie Manual Del Usuario página 63

Ocultar thumbs Ver también para XP52 Serie:
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 26
English
DESCALING OF THE STEAM AND COFFEE CIRCUIT
Empty the tank and put it back in place.
If your product is equipped with our Claris - Aqua Filter System cartridge F088, please remove this
cartridge before the descaling operation.
Fill the tank with a mixture composed of three parts water for one part white vinegar or a mixture of ½
litre of water and a packet of citric or sulphamic acid available in the shops.
Insert the filter holder (without espresso ground coffee) into the appliance and lock it by turning it to
the right as far as it will go.
Place a container under the steam nozzle.
Press the "on-off" button.
Immediately turn the switch to the "steam" position (without stopping at the "steam preheating"
position).
Let the mixture run through the nozzle until steam appears.
Turn the switch back to the "stop" position
Place a container of sufficient volume under the filter holder.
Once the light stops blinking, turn the switch to the "coffee" position and half of the mixture run through.
Turn the machine off using the "on off" button and leave the switch on the coffee position.
After 15 minutes, turn the machine back on.
Let the rest of the water run through.
Turn the switch to the "stop" position.
RINSING
IMPORTANT!
After descaling, perform 2-3 rinsing operations with clear water (without espresso
ground coffee), as described in paragraph 5 "using for the first time".
Remember to rinse the steam nozzle by following the instructions below:
Place a container under the steam nozzle.
Press the "on-off" button.
Immediately turn the switch to the "steam" position (without stopping at the "steam preheating"
position).
Let the water run through the nozzle until steam appears.
Turn the switch back to the "stop" position.
The appliance is descaled and ready to be used again.
10. GUARANTEE
This product has been designed for domestic use only. Any commercial use, inappropriate use or
failure to comply with the instructions, the manufacturer accepts no responsibility and the guarantee
will not apply.
No repairs will be carried out due to a lack of descaling will be covered by the guarantee.
If you have any problem or query please contact our Customer Relations Team for expert help and
advice.
Helpline: 0845 602 1454 - UK
(01) 677 4003 - Ireland
or consult our web site: www.krups.co.uk
58
Tabla de contenido
loading

Tabla de contenido