Game ready Med4 ELITE Referencia Rápida página 10

TWO PATIENTS /
SAME THERAPY TYPE
For two patient therapy sessions, the heat and cold
reservoirs are shared between patients. Therefore, the
temperatures will be the same for both patients.
When setting up a
therapy for the second
patient that uses the
same reservoir as the
first patient, the therapy
temperature selection
(+ or -) buttons will be inactive. The reservoir temperature
will remain at the temperature set for the first patient. If a
different temperature is desired, all therapies must first be
paused in order to adjust the reservoir temperature.
TO ADJUST THE RESERVOIR TEMPERATURE:
TWO PATIENTS /
DIFFERENT THERAPY TYPE
1. Connect the unused Hose
to the second patient
2. Select Patient 1 or Patient
2 on the Select Patient
screen to match the Hose
selected
3. Set up the second patient
therapy and Press the Start
button to begin therapy
© 2018 CoolSystems, Inc. All rights reserved. Med4 Elite Quick Reference PN 704589 Rev E
1. Pause treatment on the first patient, and adjust the temperature
(This new temperature will be the same for both patients.)
2. Resume therapy for the first patient by pressing the Start button
3. Now set up the second patient and Press the Start button to
begin therapy
QUICK REFERENCE