Game ready ARTICULATED KNEE Manual Del Usuario

FOR USE WITH
GAME READY
GRPRO 2.1 SYSTEM
®
MED4 ELITE™ SYSTEM
SIZING SPECIFICATIONS
• Size: One Size
ASSEMBLY
The Heat Exchanger (PN 520160-03)
comes as part of a pre-assembled Wrap
Exchanger is removed to launder the Sleeve, or for any other reason,
please use the following instructions to re-insert the Heat Exchanger
into the Sleeve.
1
Place the Sleeve on a flat
surface with logo side up, and
determine the opening location.
2
Insert the Heat Exchanger into
the Sleeve with the blue side
down (The blue side of the Heat
Exchanger should touch the blue
side of the Sleeve).
REMOVAL OF HEAT EXCHANGER
1. Disconnect the Connector Hose from the Wrap
2. Unzip the zipper
3. Gently pull out the Heat Exchanger
fits inside the Sleeve (PN 510160)
. If the Heat
(PN 590160-03)
ARTICULATED
WARNING
It is mandatory to fully read and understand your
System's User Manual before using the device.
Failure to follow operating instructions could result in
serious injury.
IMPORTANT
and
Read complete indications, contraindications,
cautions, and warning before using this product.
Keep this document for future reference.
3
Be sure the Heat Exchanger is
flat inside the Sleeve with no
folds or creases. Zip up the
Sleeve, if applicable. After
assembly, lay the blue side up
and ensure the Heat Exchanger
is uniformly laid out and smooth
inside the Sleeve.
STORAGE OF YOUR WRAP
Hang your Wrap on a wide hanger or lay flat. Do not fold or stack it, as
this could kink the fluid chamber and the Wrap will not work properly.
KNEE
USE GUIDE
ENGLISH