Safety Information - Enerpac ACBS-22 Hoja De Instrucciones

SAFETY INFORMATION

To avoid personal injury during system operation, read and follow all
CAUTIONS, WARNINGS, and INSTRUCTIONS included with or attached to
each product. ENERPAC CANNOT BE RESPONSIBLE FOR DAMAGE
RESULTING FROM UNSAFE USE OF PRODUCT, LACK OF
MAINTENANCE, OR INCORRECT PRODUCT OR SYSTEM
APPLICATION. Contact Enerpac when in doubt about applications and safety
precautions.
A WARNING
The system operating pressure must not exceed the maximum pressure rating of
the lowest rated component in the system. Always check product limitations
regarding pressure ranges, load capacities, and set-up requirements. Personal
injury and/or equipment damage can occur if system operating pressure exceeds
the maximum pressure rating of system components.
A WARNING
Always wear proper personal protective gear when operating hydraulic equipment
(i.e. safety glasses, gloves, etc.).
A WARNING
Make sure that all system components are protected from external sources
of damage, such as excessive heat, flame, moving machine parts, sharp
edges, and corrosive chemicals.
A WARNING
Do not attemp to connect or disconnect couplers when system is under pressure.
Attempting to connect or disconnect pressurized couplers may lead to personal
injury and/or equipment damage.
2