LaserLiner SensoLite 410 Manual Del Usuario página 8

Working with the laser receiver
Set the rotary laser to maximum speed and switch the laser receiver on.
It is able to detect the laser beam at a great distance now. Move the
SensoLite up and down through the laser beam until the middle indicator
(16) appears. Mark the measured height at the perimeter marking groove.
fast beeping
Versus function – reference height monitoring
False measurements can be avoided with this function. The receiver now
shows when the laser beam moves out of the reference height, e.g. because
of external influences acting on the rotary laser. To activate the function,
press the Plus/Minus buttons simultaneously and secure the device to the level
of the laser beam. "VER" appears in the LC display. The function is active
when the green LED lights for min. 10 seconds and the continuous tone
can be heard. The function is active as soon as the green LED flashes and
the continuous tone is muted. When the height of the laser beam changes,
a beeping sound can be heard and the green LED stops flashing.
VER
08
GB
Laser
Continuous tone =
mark the reference
Laser
10 sec
Versus function active
green LED
VER
flashing
slow beeping
VER
Height changed