Singer SteamWorks Pro Manual De Instrucciones página 9

Ocultar thumbs Ver también para SteamWorks Pro:
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 44
• Fill the Water Tank.
• Expand the Telescopic Pole by unlocking the clips and fully
extending the pole. Lock clips to secure.
• Plug in the power cord to a grounded electrical outlet and turn on
the power at the ON/OFF switch. The Power Indicator Light will
glow.
• The unit will be ready to use in just 45 seconds.
• Hang the garment on the Rotating Hanger. You may also use
a clean, rust-free clothes hanger, and place the hanger on the
Clothes Hanger Hook.
• Place the protective glove on the hand that will be holding the
garment.
• Hold the Steam Head with the steam vents pointing away from your
body.
• Touch the Steam Head to the garment lightly, moving it in an up
and down vertical motion, beginning at the bottom of the garment
and moving upward.
• Steam will rise along the inside and outside of the fabric to remove
wrinkles. Continue to steam the garment, smoothing with your free
(gloved) hand.
• Repeat until fabric is wrinkle free.
• When finished, switch the power off at the On/Off Switch.
• Unplug the steamer.
• Hang the Steam Head on the Steam Head Hanger when not in use.
• Empty the Water Tank before storing.
E_Instruction Manual.indd 7
HOW TO STEAM
O N
O F F
GBR
7
12.12.2011 17:18
Tabla de contenido
loading

Este manual también es adecuado para:

Swp.02

Tabla de contenido