Idiomas disponibles
Idiomas disponibles
46. Position the air cleaner housing (3) into the engine
compartment of the vehicle.
47. Using a 8mm socket/ratchet, install the air cleaner
housing retaining bolt (2) and tighten to 4 N∙m (35 in.
lbs.).
48. Connect the hose (1) onto the air cleaner housing.
49. Position the air inlet hose assembly (5), connect the
air inlet hose to the throttle body and the air cleaner
housing.
50. Secure the air inlet hose assembly retaining grommet
onto the ball stud (4).
51. Using a screwdriver, tighten the clamp (3) at the air
cleaner housing to 4 N∙m (35 in. lbs.).
52. Using a screwdriver, tighten the clamp (2) at the throt
tle body to 4 N∙m (35 in. lbs.).
53. Connect the electrical connector (1) to the Inlet Air
Temperature (IAT) Sensor.
54. Position the engine cover (1) and push down to secure
the retaining grommets to the ball studs.
55. Close the hood.
56. Connect the negative cable to the battery located in
the trunk near the spare tire.
Nov 10, 2010
9
K6861187
