Idiomas disponibles
Idiomas disponibles
INSTALLATION INSTRUCTIONS
1. Remove the lower B-pillar cover and fasteners.
2. Remove trim cap and fastener from the
lower seat belt anchor.
3. Open trim cover at the upper seat belt D
ring and remove fastener.
4. Remove "Air Bag" logo cover from the B-
pillar cover.
5. Adjust the seat belt D ring height adjuster to
the lowest position.
6. Remove the seat belt D ring adjuster lever
cover.
7. Remove the B-pillar cover and fasteners.
8. Insert handle reinforcement bracket (1) into
the opening in the B-pillar.
9. Continue to insert the handle reinforcement
bracket (1) until the hook at the top of it
goes into the small cutout in the B-pillar.
08/06/2014
www.mopar.com
1
1
2
K6862098
