12 Cup Programmable Coffee Maker
USER INSTRUCTIONS
PRIOR TO FIRST USE
After unpacking, check the device and ensure that all parts
are complete and for any potential transport damage – to
avoid any hazards. In case of any doubt, do not use the de-
WARNING
vice and contact our customer service. The service address-
es are listed in our warranty terms and on the warranty card.
Your device has been packaged to protect it from any potential transport
damage.
• Carefully remove the device from its original packaging.
• Remove all packaging.
• Clean the device and all accessories and remove all remaining dust from
the packaging as described in Chapter "MAINTENANCE, CLEANING, AND
CARE".
• Place the Coffee Maker near an electrical socket. Ensure there is unim-
peded access to the socket.
Ensure that the appliance stands on a level, dry, non-slip and heat-resistant
surface.
NOTE: To prevent a situation where the tank is overfilled and then the glass
coffee jug overflows, for safety reasons, we fitted an overflow opening for
the water tank on the rear side of the appliance. If you accidentally pour
too much water into the water tank, this will flow out of the opening, thus
preventing the glass coffee jug from overflowing and stopping spilt coffee
from causing damage.
• Connect the appliance to the electrical socket.
• Before the Coffee Maker is used for the first time,
jug full of cold water (fill to 12 cup mark max.) into the water tank
• Turn on the appliance, let the water run through and then pour it away to
remove any packaging dust residues.
• Do this 2-3 times.
AFTER SALES SUPPORT
1-800-886-8506
USA
User instructions
2
pour a glass coffee
6
USA
.
16