For Your Safety - Wurth Master H 28-MA Instrucciones Para El Manejo

H 28 MA - Buch Seite 11 Montag, 12. Februar 2007 10:42 10
GB
Working safely with this machine is
possible only when the operating and
safety information are read com-
pletely and the instructions contained
therein are strictly followed. In addition, the gen-
eral safety instructions in the enclosed booklet
must be followed. Before using for the first time,
ask for a practical demonstration.
The machine must not be damp and
must also not be operated in damp sur-
roundings.
High noise levels can lead to hearing
defects. Wear protective glasses and
hearing protection.
Wear a dust protection mask.
For long hair, wear hair protection.
Work only with closely fitting clothes.
Before each use, check the machine and battery.
If damage is detected, do not use the machine.
Have repairs performed only by a qualified tech-
nician. Never open the machine yourself.
Use power tools only with specifically desig-
nated battery packs. Use of any other battery
packs may create a risk of injury and fire.
Under abusive conditions, liquid may be
ejected from the battery; avoid contact. If con-
tact accidentally occurs, flush with water. If
liquid contacts eyes, additionally seek medical
help. Liquid ejected from the battery may cause
irritation or burns.
Before any work on the machine itself (e. g.
maintenance, tool change, etc.) as well as
when transporting and storing, always set the
rotational direction switch to the centre posi-
tion. Otherwise danger of injury is given when
unintentionally actuating the On /Off switch.
Ensure the switch is in the off position before
inserting battery pack. Inserting the battery
pack into power tools that have the switch on
invites accidents.
Convince yourself before using that the battery
is securely seated in the machine.
Do not strain the machine so heavily that it
comes to a standstill.
When working with the machine, always hold
it firmly with both hands and provide for a
secure stance.
For further notes on safety refer to the enclosed sheet

For Your Safety

Operate the machine only with the auxiliary
handle 11. Loss of control over the machine
can lead to accidents.
Hold the power tool only by the insulated
gripping surfaces, when performing an oper-
ation where the cutting tool may run into hid-
den wiring.
Contact with a "live" wire will make exposed
metal parts of the tool "live" and shock the
operator.
Use appropriate detectors to determine if util-
ity lines are hidden in the work area or call the
local utility company for assistance.
Contact with electric lines can lead to fire and
electric shock. Damaging a gas line can lead to
explosion. Penetrating a water line causes
property damage.
Always switch the machine off and wait until it
has come to a standstill before placing it down.
Never allow children to use the machine.
Battery and Battery Charger
The enclosed operating instructions for the
battery charger must be read carefully!
Recharge only with the charger specified by
the manufacturer. A charger that is suitable for
one type of battery pack may create a risk of
fire when used with another battery pack.
Allow a heated battery to cool before charging.
Protect the battery from heat and fire:
Danger of explosion! Do not place the
battery on radiators or expose to strong
sun rays for a longer time; temperatures
over 50 °C cause damage.
Do not open the battery, and protect it from
impact. Store in a dry and frost-free place.
When battery pack is not in use, keep it away
from other metal objects like paper clips,
coins, keys, nails, screws, or other small metal
objects that can make a connection from one
terminal to another.
Shorting the battery terminals together may
cause burns or a fire.
Use only original Würth parts and accesso-
ries.
Do not dispose of the
battery in household
waste or discard into
fire or water.
11