Stages cycling Stages Dash Guia De Inicio Rapido página 3

Charging Dash
To charge you Dash, lightly lift the rubber dust cover to
allow access to the Micro-USB port, insert the Micro-USB
plug, and insert USB plug into certified USB 2.0 5V
wall-mounted charger or USB 2.0 port on your computer.
Installing the Mount
1. Position Handlebar Clamp Ring
stem and in-between any cables and the handlebar
2. Insert the two M2.5 screws
2.5mm hex key
3. Adjust mount to preferred viewing angle
4. Tighten screws to 2 Nm.
WARNING: DO NOT OVERTIGHTEN SCREWS.
1
5
4
3
to loosely tighten ring
2
3
4
5
between right side of
into the holes and use a
5
on handlebars
3