AIRONFLEX HI-POINT Serie Instrucciones De Montaje página 22

HI-POINT
SUPPORT ASSEMBLING
2
5
1
Start the assembling by screwing
the prisoner screw (8) as the
seqüence in the picture above.
9
3
In the lower part of the prisoner
screw, screw the screw-nut (5)
and then, the prolongating piece
as in the picture above.
21
2
4
8
2
The prisoner screw must be
screwed until the superior limit of
the screw-nut support (2) as in the
picture above. After this, tighthly
fasten the support screw-nut (5)
locking the prisoner screw.
5
4
Locking the prolongating piece (9).
To lock the prolongating piece, turn
t h e s c r e w - n u t ( 5 ) a n d t h e
prolongating piece (9) in opposite
directions in order to firmly force them
against each other to obtain a perfect
locking of the set.
higher
part
8
5