Automatic Switch-Off - Phonocar VM292 Manual De Instrucciones

GB
SWITCH-ON / START RECORDING
Press Multi-Functions-key for 2 seconds. LED will light GREEN. After about 5 seconds, LED will start flashing rapidly, signaling
that recording-process has started.
SWITCH-OFF / END RECORDING
Press Multi-Functions-key for 2 seconds. The recorded file will be memorized on the micro-SD-card.
SWITCH-ON / INTERRUPT RECORDING
While recording, the green LED flashes slowly. By briefly pressing the Multi-Functions-key, the recording-process will interrupt
or start again.
NOTE: to keep files within a maximum dimension, the recorder-unit automatically saves after 15 minutes and then starts a new file.
SETTING DATE AND TIME – VISUALIZING THE RECORDINGS
How to visualize Date and Time of the recorded Videos:
• Switch-off the unit and, by means of the supplied USB-cable, connect to a PC.
• Switch-on the unit and enter into the new support found by the PC.
• Within the ROOT-directory, create a file calling it "time.txt"
• Open the created file and edit Date and Time under the following format: yyyy.mm.dd hh:mm:ss
Example: to insert 25. December 2012 18:30, you will have to write 2012.12.25 18:30:00 (with a gap between Date and Time).
• To obtain Date and Time on the screen, during reproduction, you have to put the letter "Y" at the end of the digits:
2012.12.25 18:30:00 "Y"
• Save File and switch-off the unit BEFORE eliminating the USB-cable from the PC. As an alternative, you can safely remove
the unit from the operative system. The unit now duly carries Date and Time.

AUTOMATIC SWITCH-OFF

This happens when battery is at its minimum 5%-capacity or when memory-space is full: the recording-process interrupts
and the unit switches off (intensely flashing LED).
VIDEO-REPRODUCTION ON MONITOR OR TV
Switch-on the unit and connect it to the AUDIO/VIDEO-input of a Monitor/TV, by using the supplied cable.
For Reproduction and Interruption, briefly press the Multi-Functions-key.
To jump to the next File, press Multi-Functions-key for 2 seconds.
CONNECTION TO PC/LAPTOP
Minimum System-conditions:
• CPU 500MHz or more • Operative System Win2000/XP/Vista/Win7 • USB-port
• Minimum 1Gb disc memory-space • 512 Mb RAM or more.
RECORDINGS PASSED ONTO THE PC
Introduce the USB-cable into the PC, when unit is still OFF. Now switch-on unit and wait a few seconds.
On the screen, the icon of the removable disc will appear. The removable disc will receive a letter (depending on the PC).
The directory, where the Videos are saved, is the following: Disco\DCIM\100DSCIM
You can copy, eliminate or save the files, as with normal USB-keys.
When the copy/cancellation-process of a file is finished, remove the unit securely from the operative system and switch-off, by
keeping pressed for at least 2 seconds. Only now, eliminating the cable from the USB-port.
RESET UNIT
Introduce a thinly pointed object into the Reset-location, near the USB-slot, under the eye-wear-arms, and keep pressed for at
least 2 seconds. The unit gets reset, without cancelling the existing recordings.
FEEDING AND RE-CHARGING THE INTERNAL BATTERY
For the first 3 battery-recharge-operations you should take at least 8 hours, but without exceeding the 12 hours. The red LED
signals that the re-charge-operation is running. You can re-charge the unit also by means of the supplied USB/TV-cable. All
other recharge-operations will take about 2 hours. Keep unit switched-off, while recharge-operation takes place.
Never use non-specific feeders.
LED-STATUS
Mode
Switch-on
Switch-off
Recording
Memory full
Battery flat
Battery on recharge
Battery full
USB
LED-colour
Green
off
Green
Green
Green
Red
off
Green/Red
LED-Status
Quickly flashes 3times, then remains lit for 5 sec
Off
Slowly flashing: recording on the run
Fix: recording interrupted
Quickly flashing for 30 seconds
Quickly flashing for 30 seconds
Fix
Off
Both LEDs are lit
4