Technaxx TX-49 Manual De Instrucciones página 8

Step 3: Adjust the device pedestal position according to your cable exit requirements
(top cable exit/side cable exit), pull the cable through the side cable exit from the
installation surface and the pedestal (You can skip current operation if you want to use
top cable exit mode). Line up the screw hole of the pedestal to the plastic expansion
bolt fix hole of the installation surface. Use three self-tapping screws to the plastic
expansion bolts firmly and the secure the pedestal to the installation surface.
Step 4: Line up the external enclosure with the device body to the pedestal, and then
pull the cable through the cable exit of the installation surface (You can skip current
operation if you want to use side cable exit mode). Put the buckle of the external
enclosure back to the pedestal. Turn the external enclosure and the dome body to
adjust to a proper monitor position. Now the dome camera installation is complete.
8