Tabla de contenido
ain unit, when connected to the AC power, is equipped with
omatic backlight. Every time you press a window on the main
he
backlight will come on for a few seconds. This
on will be disabled for sole battery operation. The
backlight will also come on for a few seconds when the alarm
gered.
THE RF CALENDAR CLOCK
lendar clock is radio-controlled. It automatically synchronizes
ent time and date when it is brought within range of the radio
generated from Frankfurt, Germany (DCF77).
an also set the calendar clock manually.
so,
s the RF calendar clock and alarm window.
s and hold [
] to disable the radio reception function.
s and hold [SET] until the digit flashes.
[
] and [
] to change to the desired setting.
s [SET] for the next item setting.
eat from Step 4 to finish all the settings for:
lock display formats (12hr or 24hr)
isplay language of the day-of-the-week
lock
alendar display formats (Month-Day, Day-Month)
alendar
the display language, you can choose:
nglish (E)
erman (D)
rench (F)
alian (I)
panish (S)
s [SET] to confirm.
lendar clock and alarm window has three displays: clock with
s, clock with day-of-the-week and calendar. To change from
splay to another, press the window once.
THE DAILY ALARM
the daily alarm,
s the RF calendar clock and alarm window.
s [ALARM] and the
are in the alarm mode.
s and hold [SET] till the hour digit flash.
[
] and [
] to change to the desired setting.
s [SET] for minutes setting.
[
] and [
] to change to the desired setting.
s [SET] to confirm.
indicator will be display to indicate
button to stop it. The alarm is still active and will go off ag
next day.
To deactivate the function,
1. Press the RF calendar clock and alarm window.
2. Press [ALARM ON/OFF]. The alarm indicator
ABOUT RADIO CONTROLLED CLOCK RECEPT
Whenever the WMR928NX is brought within range of the
signal with its radio reception function activated, it will sea
the clock signal at a predefined time on each day while the m
calendar clock settings will be overridden.
While receiving the signal the radio reception indicator will
A complete reception generally takes 2 to 10 minutes, dep
on the strength of the radio signal.
The indicator will stop blinking when the reception is com
The status of reception will be shown:
- Strong
- Weak
- No signal
- Receiving
To disable the radio reception function:
1. Press the RF calendar clock and alarm window.
2. Press and hold [
] to disable the function. The radio rec
indicator will disappear.
To enable the function again,
1. Press the RF calendar clock and alarm window.
2. Press and hold [
] to enable the function. The radio rec
indicator will blink.
WEATHER FORECAST
The weather forecast is displayed in the weather foreca
barometric reading window.
There are four readings for the forecast: sunny, slightly c
cloudy and rainy.
Indicator
displays on
the unit
Forecast
Sunny Slightly Cloudy
will disa
Cloudy
Ra
Tabla de contenido
