User Manual
EN
FireWare Gas Cylinder
6.
Malfunctions
Problem
The Gas Cylinder is not
igniting
Large flames are
impossible.
The flames become
smaller during (intensive)
usage.
Other
7.
After Care
You can clean the Gas Cylinder with (warm) water and household cleaning products, but do not use
chlorine. Using abrasive cleaners, scouring pads, steel wool and similar products can damage your
practice extinguisher.
8.
Waste disposal
Electric appliances, accessories and packaging need to be collected and recycled separately or
disposed off in an environmentally responsible manner.
9.
Warranty provisions
The Gas Cylinder has a one-year warranty against product and manufacturing faults. Damage as a
result of careless acting is not refunded. Repairs require expertise. It is therefore highly recommended
to return the appliance to us in the event of a defect. The warranty is cancelled if it becomes apparent
that you or a third party opened the appliance or if you or a third party have applied modifications or
adjustments of any kind without the explicit permission from the supplier.
18
FireWare Gas Cylinder
Cause
The real gas bottle's gas valve
is closed.
The Gas Cylinder's gas valve is
closed.
The hose's squeeze handle has
not been compressed.
The fuel has been used up.
The gas hose is damaged or
kinked.
The fuel has almost run out.
The regulator has frozen.
The outside temperature is too
low.
Butane has been used with too
low a temperature.
The gas hose is damaged or
kinked.
The regulator has frozen.
Solution
Open up the gas valve in
question.
Open up the gas valve in
question.
Compress the squeeze handle.
Change the gas cylinder.
Check the hoses.
Check the fuel and change this if
necessary.
Wait a moment and try again.
Connect an extra gas cylinder.
Use propane as your fuel.
Check the hoses.
Change the gas cylinder or
connect an extra gas cylinder.
Contact FireWare.
www.FireWare.nl