ELCART 12/23052-00 Instrucciones De Uso página 4

Idiomas disponibles

Idiomas disponibles

ART. 12/23052-00
Step 3:
Install the wall plate.
Put the wall plate on the wall,with the bubble level upwards.
and then screw six lag bolts into each plastic concrete anchor
through metal washer to fix the wall plate on the wall tightly.
Step 5:
Hang two monitor brackets on the wall dead plate.
Loosen hands until hung firmly.
The knobs should be loosened before adjust the angle of view
for the flat panel TV between 0°÷-10°.
After the position has been determined, the knobs in two sides
of it should be screwed down furthest.
4. Notes
(1) Choose the right place to install wall plate.
Make sure the wall can support 300kg weights up.
(2) Users should check and maintain the product frequently according to the use status to ensure the flat panel TV works normally,
safely and securely.
Please wipe joining parts with a dry cloth frequently.
Don't use it in rain or in moist environment.
Please check once two months if all bolts are secure or not.
ELCART DISTRIBUTION SPA via Michelangelo Buonarroti, 46 - 20093 Cologno Monzese (Milano) ITALY
Tel. +39 02.25117310 Fax +39 02.25117610 sito internet: www.elcart.com
La divulgazione dei dati contenuti in questa scheda è da ritenersi un servizio puramente informativo e non costituisce alcun vincolo da parte della Elcart in merito a prestazioni ed utilizzo del prodotto.
The divulgation of data contained on this technical sheet are exclusively for informational reasons and establish no link on behalf of Elcart regard to thr performances and the usa of the product.
La divulgacion de los datos contenidos en esta ficha son un servicio unicamente informativo y no constituyen ningun vinculo de parte de Elcart respecto a las prestaciones y uso del producto.
ELCART
Manuale di istruzioni/Scheda tecnica
Step 4:
Install monitor brackets at the back of the flat panel TV: each
monitor bracket should be fixed with two screws(I/J/K/L/M/N).
And the distance from two monitor brackets to the top of panel
TV should be equal and the position of the brackets should be at
as center as possible.
The knob should face outwards from the flat panel TV.
The parts should be selected according to the thread holes at the
back of the flat panel TV.
Step 6:
There is a bolt under each monitor bracket.
Screw it at the lowest position before installation.
After the orientation of TV panel has been determined and the
knobs have been screwed down furthest, re-screw it to fix the
monitor brackets with the wall plate.
IMPORTED AND DISTRIBUTED BY:
ELCART DISTRIBUTION SpA
IMPORTED AND DISTRIBUTED BY:
VIA MICHELANGELO BUONARROTI, 46
ELCART DISTRIBUTION SPA
20093 COLOGNO MONZESE (MI)
Via Michelangelo Buonarroti, 46
20093 COLOGNO MONZESE (MI)
ITALY
ITALY
www.elcart.com - [email protected]
www.elcart.com - [email protected]
PAGINA 4 DI 6
Made in China
loading